Powdered Blush or Bronzer

Printed from the FREE Recipe Database offered by From Nature With Love
www.fromnaturewithlove.com/recipe

Summary:

This recipe is easily adaptable to your favorite light or dark tones and makes a wonderful, long-lasting powdered blush or bronzer.

Ingredients:

• 2 Parts Arrowroot Powder
• 2 Parts Pearlescent Mica Powder
• 2 Parts White Kaolin Clay
• 1 Part Magnesium Sulfate

To make enough product to fit into an oversized 4 ounce wide-mouth jar (oversized to allow for tapping your brush to remove excess product) use the following measurements:

• 1 tsp. Arrowroot Powder
• 1 tsp. Pearlescent Mica Powder
• 1 tsp. White Kaolin Clay
• 1/2 tsp. Magnesium Sulfate

Instructions:

• Add all powdered ingredients to a small clean bowl and mix thoroughly.
  
  
• 1 tsp. of Pearlescent Mica Powder is suggested as a good starting point. To achieve the desired hue and intensity, you may reduce or increase the quantity of Pearlescent Mica Powder used in this recipe. Add your Pearlescent Mica Powder in 1/4 tsp. increments until you reach your desired shade.
  
  
• Spoon into a jar (see above Packaging Suggestions).

Notes:

• Measurements are given in level not heaping teaspoons.
  
  
• You can substitute cornstarch for the arrowroot powder. Alternatively, you can use 1/2 tsp. of both arrowroot powder and cornstarch.

Packaging Suggestions:

Your blush can be packaged in most any clean glass or plastic jar, but strive to use a wide-mouth jar with ample room that allows you to tap your brush firmly to remove the excess prior to application. We recommend our 4 oz. Clear Flat PET Jars With Gold Caps.

Experimentation Suggestions:

• Combine different micas to achieve unique shades.
  
  
• If you want to make a bronzer, focus on use of gold, bronze, and brown Pearlescent Micas.
  
  
• Iron Oxides can also be used in place or the Pearlescent Micas or in combination with them. If you have oily skin or do not like the appearance of shimmering blushes, try making this recipe with Iron Oxides. A little Iron Oxide goes a long way when using it as a cosmetic colorant. When experimenting with adding Iron Oxides, use far less Iron Oxide powders than micas. Start with approximately 1/32 teaspoon of iron oxide powder.
  
  
• If you have especially dry skin or you find the blush does not adhere for you, you may experiment and add a few drops of a stable vegetable oil like Watermelon Seed Oil or Jojoba. Wait to add the Pearlescent Micas until after you have blended 3-8 drops of vegetable oil into the other powdered ingredients. The Pearlescent Micas are fragile and the color will deteriorate if they are crushed.

Please Note: Most of the recipes included in the Recipe Database have been generously submitted by our customers. We are not able to test each recipe, and we cannot guarantee the results that you may obtain. The recipes are meant to be used as a guideline and source of inspiration, so please experiment in small batches. For soap recipes that include lye, please be sure to check lye calculations prior to trying the recipes. If you find that a recipe has not been calculated properly, please let us know.